MSI K8N Neo Platinum: First nForce3-250Gb
by Wesley Fink on April 26, 2004 12:05 AM EST- Posted in
- Motherboards
3400+ Performance Tests With nVidia 5950U
Since we also ran tests of the nF3-250 Reference Board with a 3400+ processor and an nVidia GeForce FX5950U, we ran additional performance tests of the MSI K8N Neo Platinum with a 3400+ and 5950U video. This allows direct comparison of the K8N Neo to the best test results from the nF3-250 Reference Board.| Performance Test Configuration | |
| Processor(s): | AMD Athlon 64 3400+ (2.2GHz) |
| RAM: | 2 x 512MB OCZ PC3500 Platinum Ltd |
| Hard Drive(s): | Seagate 80GB or 120GB 7200 RPM (8MB Buffer) |
| Video AGP & IDE Bus Master Drivers: | NVIDIA nForce version 4.12 Beta |
| Video Card(s): | Albatron GeForce FX5950U |
| Video Drivers: | nVidia Forceware Graphics Driver 56.72 |
| Operating System(s): | Windows XP Professional SP1 |
| Motherboards: | MSI K8N Neo (nVidia nForce3-250Gb) nVidia nForce3-250 Reference Board |
Facebook
Twitter
RSS
26 Comments
View All Comments
Starstream - Thursday, September 16, 2004 - link
Well, I currently have an MSI board and, frankly, I would have to really have my arm twisted before I bought another. Zillions of issues with their support and documentation. I don't know...this is impressive. The "cross mount" memory slots are an interesting twist.ksherman - Sunday, August 22, 2004 - link
this is probably a dump question, but here goes:since the 3200 OCs to the level of the 3800, does that mean i am essentially (if i can reach those speeds of course) getting a 3800 in term of performance? the 3800 are clocked at 2.4GHz, and the only real difference in the processors is the clock speed correct? so a $600+ card for around $200+ seemd like a good deal to me...
Klaasman - Saturday, May 8, 2004 - link
When are these due to be available in the USA for purchase??l3ored - Saturday, May 1, 2004 - link
i'd really like to know weather the 300fsb outperformed the max oc, then i can make memory purchase decisions, perhaps a follow up review is in order?MadAd - Wednesday, April 28, 2004 - link
Raid Questions: a) I run a fasttrack tx2000 with 4 IDE drives and am wondering would I be able to use the 2 IDE channels for raid 0+1 and get a SATA to IDE converter to run an optical drive or two?b) The last raid review at AT was Jun 2001. With new provison for raid in nf250 plus older high end boards offering variations of highpoint and promise on board plus sata raid vs ide becoming a factor, wouldnt this be a good time for another one?
AtaStrumf - Tuesday, April 27, 2004 - link
Same as ATi X800Pro. Well, well don't we have a lot of 8's on the 6th. Too bad I got an exam on that very same day. Hope I get an 8 as well :)Wesley Fink - Tuesday, April 27, 2004 - link
#19 -Several nF3-250 boards are expected at Anandtech in the next couple of weeks. They are starting to show up from many manufacturers.
Also, VIA's update to the K8T800 Pro will launch on May 6.
hifisoftware - Tuesday, April 27, 2004 - link
Very, very nice review.OC bench would not hurt, but otherwise OC is very well covered.
I belive RAID was covered in the chipset review.
One thing that I would've really liked is to know when other mobos are coming out. It would seem that even without overclocking this chipset should not be slower then previous. So maybe another motherboard is gogin to be a bit faster.
mikeymasta - Tuesday, April 27, 2004 - link
Also how 'real' is the hardware raid on the nforce3?I mean can I setup a simple 2 hd based mirror raid have install FreeBSD 5.2.1 and expect it to see only 1 drive like 'true' hardware based raid or is this just software based crap that boil down to just extra IDE ports that only do so called 'raid' by software drivers?
Personally if I was in charge of making standards I would make rule #1 of the standard of raid being that you cant put the word 'raid' on your software product unless its true hardware based raid!
Bit like the true standard of PC133 ram where it couldn't be classed as 'PC133' memory unless it had a clearly printed label on it with letters 'PC133' for a start, (I remember anand pointing that out a long time ago)
AtaStrumf - Tuesday, April 27, 2004 - link
Yep, we want OC benchies!